INA bearings are precision components and their use must be carried out with care. No matter how high-performance bearings are used, if not used properly, the high performance will not be expected. So what is the use of the bearing? Pay attention to the following when using bearings:
1. Keep the bearings and their surroundings clean.
Even small dust that is invisible to the eyes can have a bad effect on the bearings. So keep the area clean so that the dust does not intrude into the INA bearing.
2. Carefully use the bearing to give the bearing a strong impact during use, which will cause scratches and indentations, which may be the cause of the accident. In severe cases, cracks and breaks occur, so care must be taken.
3, use the appropriate operating tools
Avoid using existing tools and use the right tools.
4, pay attention to the rust of the INA bearing
When operating the bearing, the sweat on the hand can cause rust. Be careful to use a clean hand, it is best to wear gloves as much as possible.
It is very important to understand how the use of the bearing will do more with less.
When the mechanical parts near the bearing have been lubricated with oil or need to be dissipated by lubricating oil, the bearings should be lubricated with oil. There may be heat dissipation requirements when the bearing is under heavy load or high speed, or when external heat is introduced.
Micro-lubrication methods, such as drip lubrication, oil mist lubrication or oil and gas lubrication, ensure that the oil loss and bearing friction are small.
When air is used as the carrier, the oil can be supplied directly and the gas flow helps to seal.
INA Bearings are extremely fast and require good cooling of the fruit, allowing a large amount of lubricant to be sprayed directly onto all contact surfaces.
For more information and purchase please visit: https://www.supplyforever.com
