How to maintain the motor of wood engraving machine

    The motor is a very important part for the machine. If a machine has a problem with the electric motor, then the machine can't be used. For the woodworking machine, the motor on the knife is the core of the whole machine. Therefore, if you use this kind of machine, you should pay attention to the maintenance of the motor on the knife.
    The engraving machine's engraving power is generally fixed, and has different power levels, which means that the engraving machine can rotate at a different rate and work intensity. Therefore, woodworking engraving machine manufacturers, it is recommended that when using this engraving machine, first check the relevant instructions, according to the instructions for operation and debugging.
    If the maximum cutter power of an engraving machine is 500 and the speed is 5,000, then the speed is set below the maximum limit when debugging the speed, so the wear of the machine is relatively small, and the motor The pressure will not be very large. If the machine is operated at the highest value for a long time, the machine pressure is too high and the motor is easily damaged.
    In addition to the speed setting, the knife should not be used for a long time. Long-term use of a certain knife will keep the motor running, which will bring unnecessary burden to the motor of the knife. According to the manufacturer's suggestion, the working time of the knives cannot last more than ten hours, preferably around five hours.

Stone engraving machine common faults and solutions

    Stone engraving machine plays a very important role in the stone processing industry and is very helpful for improving production and processing efficiency. However, in the long-term use of the equipment, it is inevitable that there will be many faults and problems, so what are the main problems of the equipment today? Let's take a look at the basic introduction.
What if the spindle does not reach the specified speed?
    In the process of using the stone engraving machine, the speed may be uneven. The reason why the spindle cannot reach the specified speed is more. You can check whether the line between the inverter and the terminal board is connected correctly. If there is no problem, you can re-adjust the internal parameters of the inverter to restore the original speed.
What should I do with jagged jitter during operation?
   If the stone engraving machine appears to have jagged jitter during operation, it is related to the fact that the position of the machine itself is not stable. You can first re-adjust the parallelism of the machine to see if the slider is in the original position, or you can check whether the motor belt is loose or not. It is necessary to adjust the tightness of the bearing to ensure the normal operation of the engraving machine.
Stone engraving machine manufacturers provide a variety of models of engraving machine products. When using, you can have a comprehensive understanding to ensure the effective operation of the equipment and achieve better use efficiency.