Engraving machine computer signal can not receive

  In the 21st century, technology has developed rapidly, and computer systems have been widely used in production. Engraving machines are also one of the benefits. Compared to hardware facilities, the flaws and malfunctions of computer systems are even more frustrating. Should be recommended by the majority of engraving machine operators, today is the explanation, the reason why the engraving machine computer signal can not be received and the corresponding cracking program.

Causes (1) The computer serial port is faulty, just like the broken bridge between the island and the land, so that the signal can not normally transmit signals to the computer through the connection line;
"See the tricks and tricks" program: try a serial port, spare multiple serial ports on the engraving machine, you can replace the faulty serial port.

Cause (2) The machine equipment and the computer system are not connected. If the serial port still cannot solve the problem, it may be a system setting problem, and the online project is not activated.
"See the move" program: Check if the offline light is on, if it is, press the offline button to close it.

The reason (3) The engraving machine baud rate is inconsistent with the transmission rate setting in the system. It is like you want to see the cctv but adjust to the ccav channel, that is the two worlds, how can you receive signals from each other?
"See the move and move" program: check whether the signal ratios of the two are consistent, and adjust if they are inconsistent.

Reason (4) The software parameter setting does not conform to the actual operation, which is irrelevant. This is all pre-examination work, try to avoid this situation and avoid unnecessary troubles.
"See the move and move" program: Nothing to think about, just call back. The most simple work is often the most easily overlooked and easy to make mistakes.

  The above explains the faults and solutions for the four common engraving machine signals that cannot be received. In practice, it will inevitably lead to various details. And the article is not involved, please don't worry, welcome to consult our company's technical department, they will give you the most detailed solution.