Wood engraving machine auxiliary tools introduction

    Mainly refers to hammers, rafts, axes, and saws. The purpose of the axe is to cut a large amount of wood with the blank. Pay attention to the excessive force when cutting. Do not straighten it down. The axe blade should be kept at about 45 degrees with the vertical grain. Otherwise, the wood will crack. The purpose of the raft is mainly in the stage of the blank of the round sculpture, which can replace the flat knife to smooth the knife mark and smooth it for polishing; it can also be used for the hollowing process instead of the round knife or the oblique knife. The role of the raft is to adjust the shape structure quickly and extensively, and can be used in combination with the engraving knives to make the shape and shape of the figure of the person's clothing turn vividly and smoothly. The shape of the wood carving hammer is flat, flat, wide and square. The hammer surface scale can be controlled at about 7 × 5.5 × 2.5 cm. Too narrow or too thick will affect the accuracy and uniformity of the hammer landing point. The hammer is divided into two types: wooden and iron. The wooden hammer is generally made of hardwood with a large wood ratio, such as mahogany, boxwood, sandalwood, eucalyptus and fruit trees. Its specifications can be 27 cm long and 55 cm wide. It is about 45 cm thick; the grip is round and slightly flat, and the size is suitable for holding in the hand.


    Woodworking engraving tools also include small electric woodworking polishers and electric pistol drills. The purpose of the polishing machine is only the surface treatment after the completion of the work. It can replace the large-area polishing of the hand work. It saves time and effort, but it is limited to large and medium-sized works with flat volume. The pistol drill mainly uses hollow holes to punch holes. When doing large engraving, you can use it to cut the outline.