The motor is a very important part for the machine. If a machine has a problem with the electric motor, then the machine can't be used. For the woodworking machine, the motor on the knife is the core of the whole machine. Therefore, if you use this kind of machine, you should pay attention to the maintenance of the motor on the knife.
The engraving machine's engraving power is generally fixed, and has different power levels, which means that the engraving machine can rotate at a different rate and work intensity. Therefore, woodworking engraving machine manufacturers, it is recommended that when using this engraving machine, first check the relevant instructions, according to the instructions for operation and debugging.
If the maximum cutter power of an engraving machine is 500 and the speed is 5,000, then the speed is set below the maximum limit when debugging the speed, so the wear of the machine is relatively small, and the motor The pressure will not be very large. If the machine is operated at the highest value for a long time, the machine pressure is too high and the motor is easily damaged.
In addition to the speed setting, the knife should not be used for a long time. Long-term use of a certain knife will keep the motor running, which will bring unnecessary burden to the motor of the knife. According to the manufacturer's suggestion, the working time of the knives cannot last more than ten hours, preferably around five hours.
