Stone engraving machine plays a very important role in the stone processing industry and is very helpful for improving production and processing efficiency. However, in the long-term use of the equipment, it is inevitable that there will be many faults and problems, so what are the main problems of the equipment today? Let's take a look at the basic introduction.
What if the spindle does not reach the specified speed?
In the process of using the stone engraving machine, the speed may be uneven. The reason why the spindle cannot reach the specified speed is more. You can check whether the line between the inverter and the terminal board is connected correctly. If there is no problem, you can re-adjust the internal parameters of the inverter to restore the original speed.
What should I do with jagged jitter during operation?
If the stone engraving machine appears to have jagged jitter during operation, it is related to the fact that the position of the machine itself is not stable. You can first re-adjust the parallelism of the machine to see if the slider is in the original position, or you can check whether the motor belt is loose or not. It is necessary to adjust the tightness of the bearing to ensure the normal operation of the engraving machine.
Stone engraving machine manufacturers provide a variety of models of engraving machine products. When using, you can have a comprehensive understanding to ensure the effective operation of the equipment and achieve better use efficiency.
